Bestone
Home
About us
Products
Industry Case
Contact us
Body material: stainless steel Nominal diameter: DN20-100mmPressure range: 0-16kgFluid temperature: -20-200 ℃ Suitable medium:
Details
this series of angle seat valve is the latest introduction of foreign advanced production technology, a new generation of pneumatic angle seat valve combined with modern industrial application of research and development. It is widely used in food and chemical processes, sterilization machine, high pressure sterilizer, dry cleaning machine, dryer, beer production line.
Features
Visual position indicator: can be connected with a limit switch or emergency manual device. |||
Easy to install: pneumatic head can make 360 ***rotation, even limit switch can also be 360*** rotation. Can be easily installed one to two limit switch. |||
Advanced pneumatic controller: thickening of engineering plastics shell, safe and reliable. Low wear of the piston structure, large capacity and low air consumption. Internal components of self-lubricating, maintenance free. |||
A variety of control methods: normally closed, normally open, double action. |||
Requires a smaller pneumatic actuators: fluid from the valve Rod above the inflow, its head. |||
Easy to connect: MAMUR standard connector, embedded metal connector. The optional smaller control head. |||
Long-life Guide: Lease stem shaped Teflon (PTEE) sealed, avoid the dirt into the. Self lubrication, maintenance free. Stem through special treatment to ensure that the best fixed, and can automatically correct location. |||
No water hammer effect: fluid flows from the stem below, the water hammer (water impact) absorbed. |||
Advanced valve bodies: the flow angle than ordinary buildings 30%, smaller The fluid flow, better. 316 stainless steel body, teflon seal, high temperature resistance, corrosion resistance. Life is as high as seven million times. |||
Detailed Parameters

technology parameter

features
, large flow, the flow resistance is small, no water hammer:
    Y type design, section valve cavity circulation enlarged, so that the valve cavity flow more smoothly, improve the flow of the 30%.
• long service life:
    stem made from 316L stainless steel, sealed with the valve stem wedge type PTFE, automatic calibration, automatic lubrication, maintenance free.


model description

installation size (mm)

1
1