: double acting rotary angle =90 ° =90 °, single action from both ends can adjust the angle of ± 5 °   |||

Working temperature: -20 degrees to 80 degrees. |||
Source: filtering, dry or lubricated clean air, the minimum pressure of 0.4MPa, the maximum pressure 1.0MPa. |||
Basic design: pneumatic double cylinder double piston fork transmission mechanism. Model AW= double acting type; type AWS= single acting (spring reset). |||
Attachments: can be matched with a single (double) solenoid valve, limit switch back to the hearing, the electrical positioner, air FRL and manual operating mechanism, fully automatic or manual control. |||

double output torque meter

single output torque meter

cylinder volume and air consumption calculation and the weight of

Pneumatic drive device, structural characteristics and main parts of  
1, bearing [metal dear PTEE] small coefficient of friction, lubrication and sealing effect is good.  
2 [HT200 (FC200)], partition of the air chamber and rotary mechanism for isolation, reduced air consumption, to prevent foreign body into the cylinder, at the same time as the piston guide, to ensure stable operation.  
3, inlet [RC1/4, 3/8, 1/2].  
4, [HT200 (FC200)] and the piston pressure, thrust loss of small, good sealing performance.   " /span>
5, piston rod [45 (S45C+HCr)] high strength, table Surface of hard chromium, wear resistance.  
6, [45 (pins S45C+HCr)] surface hard chrome, the piston rod output stable supply fork.  
7, manual worm wheel manipulator mounted platform.  
8, axis [45 (S45C+HCr)] wear.  
9, cylinder [QT450-10 (FCD450)].  
10, limit stud adjusting switch angle, switch their adjustable ± 5 °.  
11, O ring [NBR] waterproof.  
12, fork [QT450-10 (FCD450)] the linear motion into rotary motion, the output torque characteristics of large diameter valves meet the torque characteristics.
13, box [HT200 (FC200).